Anchoring device of OHL poles - Romind

Anchoring device of OHL poles

SKU: P 2453000C
Category:

The anchoring device of overhead line poles is designed and manufactured in order to improve the stability of wooden or concrete poles when there are doubts about the quality of wood in the buried section. This device is used temporarily, when intervention works require the access of workers directly on the pole (with climbing spurs) or on the ladder, leaned against the pole.

The anchoring device contains:
Body of anchoring device (pos.1) – 1 piece
Fixing device (pos. 2) that is composed of a body that includes a tensioning device and a metallic chain – 1 piece
Main anchoring straps (pos. 3), length = 13 m, from synthetic fibers, provided with tensioning device – 3 pieces
Secondary anchoring straps (pos. 4), length = 6 m, from synthetic fibers, provided with tensioning device – 3 pieces
Steel anchoring rods (pos. 5) – 3 pieces
Device for the extraction of anchoring rods (pos. 6) – 1 piece

The body of the anchoring device consists of the following:
– Metal body, on which are mounted the anchoring rings of the device;
– Tightening system;
– Fixing cable of the device on the pole.

The device is mounted from the ground, at a height of up to 9 m, by means of a telescopic insulating stick type PTU-AS-400kV-6 – C (total length = 9 m), supplied on request.
The anchoring of the pole is ensured by the main and secondary anchoring straps provided with tensioning device, which are coupled at one end by the anchoring device itself fixed on the pole, respectively at the other end by the anchoring rods fixed in the ground.

ATTENTION!
– It will be installed at heights where there is no risk of contact with live power lines.
– It is forbidden to connect or anchor the fall protection equipment to the pole anchoring device.
– 2 operators are required for proper use of the device.

The anchoring device is delivered in a transport case.

Maximum height at which the device can be applied (m)  9
Diameter of poles with circular section on which it can be applied (mm) 110 ÷ 490
Perimeter of poles with rectangular section on which it can be applied (mm) 345 ÷ 1550
Transport dimensions (L*l*h) (mm) 1050 * 300 * 160
Total weight (kg) 31

The anchoring device contains:
Body of anchoring device (pos.1) – 1 piece
Fixing device (pos. 2) that is composed of a body that includes a tensioning device and a metallic chain – 1 piece
Main anchoring straps (pos. 3), length = 13 m, from synthetic fibers, provided with tensioning device – 3 pieces
Secondary anchoring straps (pos. 4), length = 6 m, from synthetic fibers, provided with tensioning device – 3 pieces
Steel anchoring rods (pos. 5) – 3 pieces
Device for the extraction of anchoring rods (pos. 6) – 1 piece

The body of the anchoring device consists of the following:
– Metal body, on which are mounted the anchoring rings of the device;
– Tightening system;
– Fixing cable of the device on the pole.