Filter nozzles for industrial water
The filter nozzles for industrial water are components used for retaining the granular filtering materials (ion exchange mass, quartz sand, active carbon, hard coal, gravel, etc.) inside the filters. The nozzles can be used in the following working fluid: hard water, ammonia max. 10%, formaldehyde max. 10%, isopropanol, methanol max. 50%, caustic soda max. 50%, chlorine hydride max. 10%, sulfuric acid max. 10%, salt solution max. 30%. The components of the nozzles are made of polypropylene / PVDF, by plastic molding. The nozzles are mounted on rubberized / metallic plates or on collectors - distributors with round / square section, made of metallic / plastic pipes. Flexible rubber gaskets or rigid polypropylene gaskets ensure the sealing of the nozzles on the mounting surface. The technical operating conditions are: - Maximum working pressure: 10 bar.; - Maximum admissible pressure difference: 6 bar; - Operating temperature (PP / PVDF): max. 80 / 135 ºC.The nozzles made by ROMIND are not limitative. At request there can be made various subassembly combinations.