Ladder IRMUT – multipurpose, from GRP + Al – 2 or 3 sections

The IRMUT multipurpose ladders with 2 or 3 sections have the stiles made of polyester resin reinforced with fiberglass (GRP) and the steps made of aluminum. The ladders can be set up depending the working height and can be used in the following variants: propped in closed position, in extended position or as double ladder (λ type).

The basic section is provided (at request) with a telescopic stabilizer bar. It is mounted on the base section, telescoped at both ends, by pressing a button at each end and locked automatically when the ends extend to the maximum. The bar is equipped with two non-slip articulated soles, reinforced with an internal metal plate, for greater rigidity. The articulated soles are equipped with a connector to which the height compensating device (unevenness foot) can be added – at request.

The multipurpose ladders can be equipped, at request, at the end of the upper section with a support, rolling and fastening device, with a textile strap.

Due to the insulating rails, ladders are recommended for works in electrical installations.

Multipurpose IRMUT ladders can be delivered with the following optional accessories:
– Support, rolling and fastening device on the pole, with textile strap
– Telescopic anti-flexion device, to limit the bending
– Extension hook, for handling the upper sections from the ground
– Height compensating device (unevenness foot)