Cooling tower PME type

Mixed structure casing
Construction materials:
• hot-dip galvanized steel (internal and external support structure), sandwich panels in fibreglass of 22 mm thickness
Characteristics:
• high thickness (4-6 mm) of the profile channels of which the structure is composed, hot-dip galvanized (600 g/m2) after fabrication
• internal and external surface protection of the panels with a gel-coat resistant to UV radiation, hot and cold water, abrasion caused by weathering and by chemicals
• non-corroding

Fibreglass sandwich panels means:
• double wall of fibreglass laminate between which is interposed the expanded support material
• only the inside surface of the side wall is incontact with the water to be cooled
• even for large side wall dimensions, greater mechanical strength
• good sound absorption effect on the internal falling water noise.

Top-plate with air discharge cylinder and water collecting basin
Construction materials: 
• orthophthalic polyester resin, reinforced with several layers of glassfibre matting
Characteristics:
• internal and external surface protection by means of a gel-coat resistant to UV radiation
• light-weight
• non-corroding

Multi-blade axial fan
Construction materials:
• hot-galvanized steel (electric motor support), extruded aluminium alloy with propeller profile or fibreglass reinforced plastic (fan blades), stainless steel (fan screen grille)
Characteristics:
• high performance, low electrical power input
• directly driven by the electric motor

Fill pack (or heat exchange surface)
Construction materials:
• self-extinguishing PVC
Characteristics:
• 20 mm wide flute (air/water channels), reinforced top layer, reduced fouling.

PME-E CONT series, for the shipment in container

Dimensional elements:
A – Total height of tower
B, C – Length / Width of the cooling tower (horizontally)
D – Axis quota of inlet water pipe in tower towards the base of the tower

PME cooling tower with basin and one fan

PME cooling tower without basin and one fan

PME cooling tower with basin and two fans

PME cooling tower without basin and two fans

1. Body
2. Basin (optional)
3. Fill pack (for heat exchange)
4. Lid with axial fan
5. Cooling water distribution system (provided with flanges)
6. Shutters
7. Inspection/visit window
8. Electrical connection box