Intended use: discharging of residual voltage in condenser batteries, electrical charges present on conductor elements after HV periodical tests with increased voltage or on the terminals of alternating current electric motors.
Operating way: using the insulating stick of the device, by applying the discharge resistances on conductor elements where residual electrical charges occur. Optionally, an adapter AR C-C type can be procured, provided with “hexagon 12” coupling system with folding option at 30°, 60°, 90°.
Components:
-Telescopic insulating stick – 1 piece
-Discharging resistance for condenser (RC) – 1 piece
-Discharging resistance for condenser battery (RB) – 1 piece
-Discharging resistance after HV periodical test (RIP) – 1 piece
-Earthing cable for RIP resistance – 1 piece
-Condenser short-circuiting device (SC) – 1 piece
|
Technical characteristics |
Value |
|
Nominal operating voltage (kV) |
24 |
|
Utile / total length of PTU 20-35-F stick (m) |
1,05 / 1,46 |
|
Battery discharge resistance RB (Ω) |
50 |
|
Condenser discharge resistance RC (Ω) |
2,5 |
|
Discharge resistance after HV periodical test RIP (Ω) |
75 |
|
Earthing cable length CP (m) |
6 |
|
Condenser short-circuiting device length SC (m) |
1,5 |
Components:
-Telescopic insulating stick – 1 piece
-Discharging resistance for condenser (RC) – 1 piece
-Discharging resistance for condenser battery (RB) – 1 piece
-Discharging resistance after HV periodical test (RIP) – 1 piece
-Earthing cable for RIP resistance – 1 piece
-Condenser short-circuiting device (SC) – 1 piece
