NI 11 current measurement clamp meter is a device designed for the quick and safe inspection of the value of alternating voltage, constant voltage, frequency, continuity of power circuits, power resistances, alternating current value.
NI 11 multimeter consists of the LCD device which also includes the clamp for the measurement of the alternating and direct value and the black and red measurement testers. The LCD is backlit, which allows the use of the device in areas of poor lighting.
In order to select the desired measurement range, it is sufficient to position the switch as follows:
Off
V – alternating/direct voltage
Ω – alternating current level
A – resistance and continuity
Hz – -frequency
NI 11 multitester selects automatically the measurement range for each type of measurement.
Acoustic signalling indicates circuit continuity. Black and red testers are used for the measurement of voltage rates, resistance and inspection of continuity, and the current level is measured by the insertion of the conductor in the clamp.
| Technical characteristics | |
| Alternating / direct voltage (V) | 0,1÷600 |
| Alternating / direct voltage (V) | 0,1÷600 |
| Resistance (Ω) | 0,1÷400 Ω |
| Alternating current intensity (A) | 0,1÷600 |
| Maximum opening of the clamp (mm) | 40 |
| Maximum diameter of the conductor (mm) | 35 |
| Operating temperature range (C) | 0...+50 |
| Supply | 9 V alkaline battery type 6LR61 |
| Overall dimensions (mm) | 220 x 70 x 50 |
| Weight (kg) | 0.360 |
NI 11 multimeter consists of the LCD device which also includes the clamp for the measurement of the alternating and direct value and the black and red measurement testers.
The LCD is backlit, which allows the use of the device in areas of poor lighting.
